INSTALLING THE BATTERIES

Battery Cautions:

• The ADVANCED TASER® M18/M18L is shipped without batteries.
• To help ensure a tight connection between the batteries and the contacts in the battery tray, the tray is designed with springs at both the positive and negative ends. The proper orientation is marked on the inside of the battery tray. Inserting one or more batteries with the improper polarity may result in failure of the weapon and/or damage to the weapon circuitry.
• Never mix alkaline and NiMH rechargeable batteries .
• Never use batteries that are leaking or have visible signs of damage.
• Inserting a battery backwards could cause the battery to leak, overheat, and rupture.
• Installing the batteries in the wrong direction will cause irreparable damage to the M18/M18L device.

Removing the Battery Tray

1. Place the safety switch in the down (SAFE) position.
2. Remove the TASER Cartridge.
3. Depress the metal plunger and slide the battery cover toward the front of the weapon.
4. Remove the battery tray. Tapping the heel of the weapon on the leg or palm of the hand may help release the tray from the weapon.

Installing New Batteries:

1. Inspect the battery tray for cracks or deformities. If the battery tray is damaged, request a new battery tray from TASER International.
2. Insert the batteries in a “V” shape.
3. Verify that the batteries are in the correct orientation.
4. Verify that the M18/M18L safety switch is in the down (SAFE) position.
5. Verify that the TASER Cartridge is removed.
6. Insert the battery pack into the M18/M18L with the contacts facing into the handle. NOTE: The tray can only be inserted in one direction in order for the battery cover to close.
7. Install the battery cover and ensure that the cover pin is properly seated.
8. Perform a spark test to ensure proper orientation.